Every figure on this page is copied from a publisher's own cost page, with the publisher named in the table and linked in the sources. Nothing here is a local g
Every figure on this page is copied from a publisher's own cost page, with the publisher named in the table and linked in the sources. Nothing here is a local guess dressed up as a quote, and nothing is a number we made up to fill a row.
| Job | Published price | Publisher |
|---|---|---|
| Full door replacement, all types | $754 to $1,707, average $1,231 | Angi, 15,434 projects |
| Standard panel door, installed | $1,151 to $1,869, average $1,400 | This Old House |
| Door plus installation, all types | $260 to $2,300, average $1,200 | Forbes Home |
| Single door, 8 by 7 foot opening | $400 to $900 | Forbes Home |
| Double door, 16 by 7 foot opening | $650 to $3,600 | Forbes Home |
| Insulated door, installed | $1,100 to $4,200, average $1,500 | Angi |
The ranges are wide because the product is wide. A stock steel door on a standard opening and a custom carriage house door on a widened opening are both garage doors, and they do not share a price.
| Garage | Published range per door | Publisher |
|---|---|---|
| One car | $500 to $3,000 | Angi |
| Two car, one double door | $800 to $5,000 | Angi |
| Two car, two single doors | $1,200 to $4,900 | Angi |
| Three car, one double and one single | $1,400 to $7,000 | Angi |
| Three car, three single doors | $1,700 to $7,200 | Angi |
Two single doors cost more than one double door of the same total width, because each opening needs its own tracks, springs, cables and labour. A Fairfax County townhouse with a single eight by seven opening sits at the bottom of every row here.
| Material | Published range per door | Publisher |
|---|---|---|
| Steel | $650 to $3,200 | Angi |
| Aluminum | $600 to $2,900 | Angi |
| Wood | $900 to $4,500 | Angi |
| Composite or false wood | $650 to $4,800 | Angi |
| Vinyl | $800 to $2,500 | Angi |
| Fiberglass | $800 to $2,700 | Angi |
| Glass and aluminum frame | $2,500 to $8,000 | Angi |
This Old House publishes a tighter steel figure of $1,093 to $1,288 for the same reason it publishes a tighter overall average: it is pricing one construction rather than every construction that carries the name.
| Job | Published price | Publisher |
|---|---|---|
| Spring replacement, per spring | $150 to $350, average $250 | Angi |
| Torsion spring alone | $75 to $150 | Angi |
| Extension spring alone | $50 to $100 | Angi |
| Extension to torsion conversion | $400 to $800 | Angi |
| Panel replacement | $350 to $900, average $550 | Angi |
| Opener, supplied and installed | $218 to $540, average $379 | Angi, 11,399 projects |
| Labour, per hour | $65 to $85 | Angi |
Angi's panel page is localised to Centreville, in Fairfax County, and returns the same $350 to $900 band with a $550 average and a $3,400 top end for a premium door. Springs are replaced in pairs, so the per spring figure doubles on a double door.
Fairfax County Land Development Services publishes the list of residential work that needs a permit. New door openings are on that list, and so are new or relocated electrical fixtures. A like-for-like swap of a garage door or an opener on the existing opening is not listed as its own item, but the county describes that page as general guidance rather than the code itself.
So do not take this page as a ruling. Check with Fairfax County Land Development Services on 703-222-0801 before work starts, particularly if the opening is being widened, the header is being changed, or a new circuit is going in for the opener. Any company worth hiring will tell you the same thing and will not talk you out of asking.
Ask for four things in writing: the door model and its R-value if it is insulated, whether the tracks, cables, rollers and springs are new or reused, whether removal and disposal are included, and what happens if the framing behind the opening turns out to be soft. The fourth one is the difference between a price and an estimate in a county full of fifty to seventy year old houses.
A quote far below every published range is usually a reused spring set and a door that does not match the opening. A quote far above it usually includes new tracks, a new opener and carpentry. Both can be honest. Only one of them is the job you asked for.
Published figures run $754 to $1,707 for a full replacement with an average of $1,231 at Angi, $1,151 to $1,869 with an average of $1,400 at This Old House, and $260 to $2,300 with an average of $1,200 at Forbes Home. A single eight by seven door is published at $400 to $900 and a sixteen by seven double at $650 to $3,600.
Angi publishes $150 to $350 per spring with a $250 average, a torsion spring at $75 to $150, an extension spring at $50 to $100, and a conversion from extension to torsion at $400 to $800. Springs are replaced in pairs.
Angi publishes $218 to $540 installed, with a $379 average across 11,399 projects, on labour of $65 to $85 an hour for two to six hours. The unit alone is $150 to $520.
It depends on what failed. A spring or a panel is published well below the price of a door. A door with a bent track, a rusted bottom section, a cracked panel and tired springs is usually a replacement, because the parts and labour add up to most of a new door.
Ask Fairfax County Land Development Services on 703-222-0801 before work starts. Their published list puts new door openings and new electrical fixtures in scope, and describes the list as general guidance rather than the code. Widening an opening or adding a circuit for an opener is the case to check.